CONVEYOR BELTS |
We manufacture conveyor belts IS 1894 & can be supplied in widths upto 1200 mm & continuous length of 50 mtrs. without joining. Excellent for use in pharmaceuticals, material handling conveyors in Industries.
Manufacturing range include conveyors for General purpose applications, Food Grade Applications, Heat & Oil resistant conveyors.
ADVANCE RANGE OF COVER GRADE:
GEEIC offers Conveyor Belts in following cover grades to cater to specific requirements of various applications.
APPLICATION | GRADE | MATERIAL REFERENCE |
1. General Purpose | M-24 | Metalic Ore, |
Coke Stone, | ||
Cooper Ore, Lime stone etc. | ||
N-17 | Coal, | |
Wood Chips, | ||
Clay Cement | ||
AAR
(Abrasion Resistant) |
Cooper Ore | |
Stand, Fertilizer etc. | ||
2. Hot Material | AHR | Soda Ash, |
Chemicals, Cement etc. with temp, upto 100°C | ||
ASHR | Cement Clinker, | |
Standard Ore, | ||
Foundry Sand etc. with temp. upto 150°C. | ||
3. Special Application | AOR
(Oil Resistant) |
Material with Petroleum Tar Sand, |
Oil Sand etc. | ||
ACMR | Chemicals & Fertilizers | |
Hygienic | Food products, Tea, Coffee, Pharmaceuticals etc. | |
4. Fire Resistant | FR
(Fire Retardant) |
Coal for Thermal Power Houses etc. |
NYLON FABRIC CONVEYOR BELT TECHNICAL DATA
BELT DESIGNATION | Maximum allowable working Tension (Vulcanised splice) | Maximum belt width (mm) for adequate load support (Material Density in T/m3) | Minimum Belt width (mm) for adequate troughing of Empty Belt (Troughing Angle) | Nominal Caracass Thickness | Nominal Caracass Weight Kg/cm width/mtr | |||||
Type | Rating | Kn/m | 0.8 | 1.5 | 2.5 | 20° | 35° | 45° | mm | |
General | 200/2 | 20 | 750 | 600 | 450 | 300 | 400 | 400 | 2.6 | 0.025 |
Duty | 250/2 | 25 | 800 | 600 | 450 | 300 | 400 | 400 | 2.6 | 0.025 |
(GD) | 315/3 | 31.5 | 1050 | 800 | 650 | 400 | 450 | 450 | 3.1 | 0.034 |
400/3 | 40 | 900 | 800 | 650 | 400 | 450 | 500 | 3.1 | 0.036 | |
500/3 | 50 | 1050 | 900 | 800 | 400 | 450 | 500 | 3.8 | 0.039 | |
630/3 | 63 | 1200 | 1000 | 800 | 400 | 450 | 500 | 3.9 | 0.042 | |
Standara | 315/3 | 31.5 | 1050 | 900 | 750 | 400 | 500 | 500 | 3.7 | 0.041 |
Duty | 400/3 | 40 | 1050 | 1000 | 750 | 500 | 500 | 650 | 3.7 | 0.043 |
(SD) | 500/3 | 50 | 1200 | 1050 | 900 | 500 | 500 | 650 | 4.2 | 0.046 |
630/3 | 63 | 1200 | 1050 | 900 | 500 | 500 | 650 | 4.3 | 0.050 | |
630/4 | 70 | 1400 | 1200 | 1000 | 600 | 750 | 900 | 5.3 | 0.056 | |
Heavy | 200/2 | 20 | 900 | 650 | 500 | 300 | 400 | 500 | 3.0 | 0.030 |
Duty | 250/2 | 25 | 1000 | 650 | 500 | 400 | 400 | 500 | 3.0 | 0.030 |
(HD) | 315/3 | 31.5 | 1200 | 1000 | 800 | 500 | 500 | 500 | 4.0 | 0.048 |
400/3 | 40 | 1200 | 1050 | 900 | 500 | 600 | 750 | 4.0 | 0.050 | |
500/3 | 50 | 1400 | 1200 | 1050 | 500 | 600 | 750 | 4.6 | 0.052 | |
630/3 | 63 | 1400 | 1200 | 1050 | 500 | 600 | 750 | 4.7 | 0.057 |